Main SiteAbout UAWUAW ServicesVehiclesLightingRacingOnline Store

 
 
Ultimate Auto Works offers the finest services in Arizona for your automotive needs.  You have come to the right place, a BMW mecca if you will to maintain your vintage or new BMW.  With our competitive business ethics you always save time and money.  Ultimate Auto Works has over 50 years of combined experience servicing and maintaining all BMW's.

_________________________________________________________________________________________

OIL & FILTER CHANGE
  • Drain Oil and Replace Oil Filter with Genuine BMW Filter. 
  • Refill with BMW recommended high performance motor oil per vehicle specifications.  Check fluid levels for radiator, power, steering, brake, clutch, battery, transmission and differential. Inspect windshield wipers.

_________________________________________________________________________________________

bluem3.png

AVERAGE BMW SERVICE INSPECTION ( 1 )

Standard E36 BMW example:

  • Undercarriage - Change engine oil and oil filter while engine is at operating temperature. Check transmission for leaks.  Check rear axle for leaks.  Visually check fuel tank, lines and connections for leaks.  Check condition, position, and mounting of exhaust system, examine for leaks.  Check power steering system for leaks.  Check overall thickness of front and rear disc brake pads.  Examine brake disc surfaces. Clean brake pad contact points in calipers. Grease wheel centering hubs.  Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage and joint disc.  Check front control arm bushings for wear.  Check brake (and clutch) system connections and lines for leaks, damage, and incorrect positioning.  Check for free movement of the parking brake cables. Adjust parking brake if necessary.  Check all tire pressure (including spare). Correct if Necessary.  Check condition of tires (outer surfaces [left/right]), tread wear and pattern; in case of uneven tread wear read adjust wheel alignment if requested.  NOTE: If requested, rotate all four wheels as instructed and rebalance.
  • Engine Compartment - Read out diagnostic system.  Check engine cooling system/heater hose connections for leaks.  Check coolant level and antifreeze protection level "add coolant if necessary."  NOTE: Coolant must be replaced every 3 years (time interval begins from vehicles production date).  Check level of brake and clutch fluid in reservoir, add fluid if required.  Replace brake fluid every 2 years (time interval begins from vehicles production date).  Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.  Check air conditioner for operation.  Reset Service Indicator.
  • Body/Electrical Equipment - Check battery electrolyte level and add distilled water if required.  Perform battery load test.  Check lighting system, i.e., headlights, foglights, parking, back-up, license plate, interior ( including map reading lights), glove box, flashlight, illuminated make-up mirrors, luggage compartment lights.  Check instrument panel and dashboard illumination.  Check all warning/ indicator lights, check control.  Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/ flasher switch.  Check wipers and washer systems, wiper blades, washer jet positions.  Check condition and function of safety belts.  Oil hood, trunk/tailgate and door hinges. Grease hood, trunk/tailgate and door latches. Check operation of all latches.  Check central locking/double lock.  Replace microfilters.  NOTE: Replacement interval in dusty operating conditions must increase.  Check heater/air conditioner blower fan, rear window defogger.  Check rear view mirrors.  Visually examine the SRS airbag units for torn covers, obvious damage or attachment of decals, decoration or accessories.  Active automatic roll over protection system (if equipped) visual diagnostic link.  NOTE: First remove hardtop/lower top.
  • Final Inspection - Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic transmission.

_________________________________________________________________________________________

bluem3.png

 AVERAGE BMW SERVICE INSPECTION ( 2 )

Standard E36 BMW Example:

  • Engine Compartment - Includes all items listed above under Inspection 1, and the following checks and maintenance items -                 Engine Compartment - Replace Spark Plugs.  Replace intake air cleaner element. NOTE:  Increase replacement interval in dusty operating conditions.
  • Undercarriage - Check thickness of parking brake lining.  Half-shafts: Check for leaks at flexible boots.  Inspect entire body according to terms of rust perforation limited warranty (must be performed at least every two years).
  • At every Second Inspection 2 - Check clutch disc for wear.
  • Undercarriage - Change engine oil and oil filter while engine is at operating temperature.  Check transmission for leaks.  Check rear axle for leaks.  Visually check fuel tank, lines and connections for leaks.  Check condition, position, and mounting of exhaust system, examine for leaks.  Check power steering system for leaks.  Remove and install front and rear disc brake pads, check overall thickness.  Examine brake disc surfaces. Clean brake pad contact points in calipers. Grease wheel centering hubs.  Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage and joint disc.  Check front control arm bushings for wear.  Check brake (and clutch) system connections and lines for leaks, damage, and incorrect positioning.  Check for free movement of the parking brake cables. Adjust parking brake if necessary.  Check all tire pressure (including spare). Correct if Necessary.  Check condition of tires (outer surfaces [left/right]), tread wear and pattern; in case of uneven tread wear read adjust wheel alignment if requested.  NOTE: If requested, rotate all four wheels as instructed and rebalance.
  • Engine Compartment - Read out diagnostic system.  Check engine cooling system/heater hose connections for leaks.  Check coolant level and antifreeze protection level, add coolant if necessary.  NOTE: Coolant must be replaced every 3 years (time interval begins from vehicles production date).  Check level of brake and clutch fluid in reservoir. Add fluid if required.  Replace brake fluid every 2 years (time interval begins from vehicles production date).  Check windshield washer fluid level and antifreeze protection. Fill up and/or correct if necessary.  Check air conditioner for operation.  Reset Service Indicator.
  • Body/Electrical Equipment - Check battery electrolyte level and add distilled water if required.  Perform battery load test.  Check lighting system, i.e., headlights, foglights, parking, back-up, license plate, interior ( including map reading lights), glove box, flashlight, illuminated make-up mirrors, luggage compartment lights.  Check instrument panel and dashboard illumination.  Check all warning/ indicator lights, check control.  Check turn signals, hazard warning flashers, brake lights, horns, headlight dimmer/ flasher switch.  Check wipers and washer systems, wiper blades, washer jet positions.  Check condition and function of safety belts.  Oil hood, trunk/tailgate and door hinges. Grease hood, trunk/tailgate and door latches. Check operation of all latches.  Check central locking/double lock.  Replace microfilters.  NOTE: Replacement interval in dusty operating conditions must be performed more often.  Check heater/air conditioner blower fan, rear window defogger.  Check rear view mirrors.  Visually examine the SRS airbag units for torn covers, obvious damage or attachment of decals, decoration or accessories.  Active automatic roll over protection system (if equipped) visual diagnostic link.  NOTE: First remove hardtop/lower top.
  • Final Inspection - Road test with check of brakes, suspension, steering, clutch/manual transmission or automatic transmission.

_________________________________________________________________________________________
 

Brembo Aftermarket Brake Rotors

BRAKE PADS AND ROTORS/Service 4
When its time to replace your Brake pads and rotors let Ultimate Auto Works save you money and time. Our technicians use the same factory parts as the dealership so you are covered by a parts and installation warranty.       


_________________________________________________________________________________________ 

Img40.jpg

BATTERY INSPECTION, COOLANT AND BRAKE FLUSH
Battery Inspection including charge and condition of battery.  Coolant flush and replacement using fresh BMW coolant. Brake flush and replenish with new brake fluid.

 

 

_________________________________________________________________________________________

Img55.png

VEHICLE BELT REPLACEMENT                                

Your BMW vehicle may need one or all of its  belts replaced soon.       Note: "A BMW with a timing chain does not require replacement of timing belt." Please don't put off your vehicles preventive maintenance, if it has been more than 50,000 miles since your belts have been replaced bring your car down to replace your Alternator Belt, Timing Belt, AC Belt and Power Steering Belt

 

_________________________________________________________________________________________

grabbed frame 45.bmp

VEHICLE WHEEL ALIGNMENT

Ultimate Auto Works has an advanced laser guided computer wheel alignment machine for a hyper accurate alignment job. We update our Hunter Alignment rack on a regular basis..

 

 

 

_________________________________________________________________________________________

yokohama 1011.png

VEHICLE TIRES                                

We have a large tire inventory and a huge tire network with the major vendors in the USA.  If you need tires we can get them. Ultimate Auto Works Inc. has an in house tire/wheel balance machine to balance your tires and wheels.
 

 

     


© Copyright Ultimate Auto Works. Designed by Brian Deatherage